//////////////CISCO7204/06 NPE-225+I/O-1FE/ I/O-AUX

Enabled 燈亮，Slot0:上插有8M Flash卡，而且能檢測到有軟件存在.//////////////

System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1) boot

*** Coprocessor Unusable Exception *** ///這里提示協處理器不可用，沒有在意////
PC = 0x87ff7840, Cause Reg = 0x2000002c, Status Reg = 0x3040d003

monitor: command "boot" aborted due to exception

/////////// 從NPE上啟動BOOT軟件，但是沒有成功，重新嘗試啟動///////////

System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1)
Copyright (c) 2001 by cisco Systems, Inc.
C7200 platform with 131072 Kbytes of main memory

*** Emulating mis-aligned load at 0x8000ca6a 
PC = 0x87ff7800 ... succeeded 

*** Emulating mis-aligned store at 0x800108fd 
PC = 0x87ff7808 ... failed, opcode = 0x0 

*** Coprocessor Unusable Exception *** 
PC = 0x87ff7840, Cause Reg = 0x2000002c, Status Reg = 0x3040d003 

monitor: command "boot" aborted due to exception 

Rommon1>dev 
flash: bootflash 
slot0: 
slot1: 
disk0: 
disk1: 
Rommon2>dir bootflash: 
bootflash:/ 
1662343 bootflash: nffca.na 
Rommon3>dir slot0: 
slot0:/ 
4828273 slot0: nffca12.na 
Rommon4>boot bootflash: 

重復啟動然后回到ROM狀態....
Rommon5>boot slot0:
狀態依然.......
Rommon6>cpu_card_type
C7206 NPE(225)
可以認出NPE的類型為225。

換了一臺路由器問題一樣（NPE225）

CISCO7204/06 NPE150+I/O-1FE /I/O-AUX
啟動正常.